It’s a good idea to empty when the bag reaches 70-80% full, however, as this reduces pressure on the motor and prevents compacted dirt from affecting performance.. Related Article:.
This leads to overheating and activation of the thermal cut-out.. Fortunately, this is one of the easiest issues to solve.Switch off your vacuum cleaner and unplug it from the mains supply, then check your manual for how to clean the filters.

Once the filters have been cleaned, allow 24 hours for the vacuum to cool and the filters to dry before trying to start your vacuum again.. On a similar note, overfilling a bagless Vax vacuum can have a similar effect on airflow.Make sure you empty your vacuum before it reaches the maximum fill line..Many Vax vacuums have more than one filter, so make sure you check the instructions for cleaning all the filters in your machine.. 2.

Blockage Inside the Vacuum Cleaner.Another common cause of overheating is a partial blockage inside the vacuum.

Any blockage or clog inside the machine will reduce the amount of airflow through the vacuum, so there is less air passing over the motor..
This issue can be more difficult to solve than a blocked filter, as it’s not always obvious where the blockage is likely to be.The Shark AZ950UKT combines washable foam and felt filters.
The filtration is further enhanced with Shark’s anti-allergen complete seal, to ensure 99.9% of tiny dust and allergen particles are locked away..This makes it a decent choice for allergy sufferers who want a bagless vacuum.
However, we should note that a bagged model is nearly always the best choice if you’re sensitive to dust, as bags keep allergens trapped during the emptying process.. Emptying and Cleaning.Although somewhat messy, the AZ950UKT’s bagless emptying system is quick and easy.
(Editor: Cordless Trampolines)